|
|
Thermowell |
DESCRIPTION
As per Drawing or our STD.
THERMOWELL O. D : 17,18, 19,20.21,22,23,24,26,28,30,32MM
THERMOWELL : 6,6.5,7,9,10,10,5,11,11.5,12,12.5,13,14, 15,16mm
Barstock Type, Total length 75mm to 800mm only.
Fabricated Type, Total length 75mm to 1500mm only.
Flanges std. ASA, ANS1, BS, DIN Standard for Pressure
rating of 150, 300, 400, 600, 900, PS1
MATERIALS : AISI 304, 316, 316L, 321, M.S, C.S. etc.
BARSTOCK Thermowell with flange Std. ASA, ANSI, BS,
DIN standard for Pressure Rating of 150, 300, 400, 600,
900 PS.I.
* Other Material & Techinical Specification on request
|
|
|
|
|
Piston Type Pulsation Snubber |
A. Female Part FEATURES :
B. Male Part, 01, 02, 03 Type-01 for ¼ inch BSP, 1/4 inch NPT and
01, 02, 03 Piston assembly M-12 connections.
A and B will be 28 mm Type-02 for ½ inch BSP ½ inch NPT and 3/8
hexagonal for Type 01, inch NPT and M-20 connections.
and 22 mm for Type 02
Piston assembly 1 for less viscosity and 3 for higher viscosity. Piston 2 is
installed when the time of snubber assembly. To change the pistons unscrew
and remove the female part (B) from the male part (A)and change the piston
as required depending fluid viscosity.
Snubber can be used for pressure vacuum and compound gauges and material
should be selected depending on application.
While placing an order, please specify Type, material and thread connection.
|
|
|
|
|
Needle Valve (Isolation Valve) |
CONNECTION : Provided threads as per thread chart and also can be provided female to female or male to male and
specified thread requirement.
MATERIAL : SS 316, SS 304, brass.
: (Can be provided specified thread requirement)
ORDERING : Material,
INFORMATION : thread connection, and type.
PRESSURE : 0 to 400 Kg/cm²
(Can be provided specified thread requirement)
|
|
|
|
|
Manifold Valve |
[MANIFOLD VALVE]
TEST PRESSURE : 250kg/cm2
SEALING : Teflon washer
BODY MATERIAL : AISI SS304, 316, 321, monel etc.
INLET CONN : 3/8", 1/2 BSP/NPT (F) both side adapters.
OUTLET CONN : 3/8",1/2" BSP/NPT (M)
NOTE : Avaliable in 2 Ways, 3 Ways & 5 Ways
OTHER MATERIAL & TECHNICAL SPECIFICATION ON REQUEST
|
|
|
|
|
Quick And Reducing Connecting Coupling And Instruments Ferrule Fitting Items |
QUICK AND REDUCING CONNECTING COUPLING & INSTRUMENTS
DESCRIPTION : ADAPTER UNIONS FLANGE NIPPLE
TEST PRESSURE : 25 kg/cm².
Screw Threads as per requirements.
MATERIALS : AISI 304, 316, 304L, 316L, 321, Brass, M.S, C.S. etc.
CONNECTIONS : 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1½", 2", BSP / NPT/ M etc.
Other Material & Techinical Specification on request
|
|
|
|
|
Ferrule Fitting Items |
DESCRIPTION
: ADAPTER, UNIONS, FLANGE, NIPPLE
TEST PRESSURE : 25 kg/cm².
Screw Threads as per requirements.
MATERIALS : AISI 304, 316, 304L, 316L, 321, Brass, M.S, C.S. etc.
CONNECTIONS : 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1½", 2", BSP / NPT/ M etc.
Other Material & Techinical Specification on request
|
|
|
|
|
Gauge Cock |
A. Body FEATURES :
B. Instrument Connection. Both round and square models available
C. Process Connection. Teflon seals (PTFE)
D. 65 mm. available in 2-way vent hole type and 3-way
E. 60 mm. cock
F. In 3-Way Cock Thread
Connection 2-way vent hole.
|
|
|
|
|
Pulsation Dampener |
1. Body
FEATURES :
2. Female Thread : Universal pulsation dampener should be used
3. Fine Thread Chock Screw when rapid pressure fluctuations which make
4. Lock Nut the needle of the Pressure gauge (Pressure
5. Male Thread instrument) vibrate and difficult to read. It is
6. Ball Check Value unique combination of ball check cut off and a
A. 22 MM For Model 01 And Fine thread choke valve. These operating
28 MM For Model 02. characteristic are shown as figure number 1
B. 22 MM For Model 01 And and 2.
60 MM For Model 02. : After installation of the dampener the fine
thread chock valve (diagram number 3)
should be adjusted to reduce pulsation in the
line and needle vibration. Dampener can
|
|
|
|
|
Over Pressure Protector (Gauge Saver) |
. Body
FEATURES :
2. Female Thread : Universal pulsation dampener should be used
3. Fine Thread Chock Screw when rapid pressure fluctuations which make
4. Lock Nut the needle of the Pressure gauge (Pressure
5. Male Thread instrument) vibrate and difficult to read. It is
6. Ball Check Value unique combination of ball check cut off and a
A. 22 MM For Model 01 And Fine thread choke valve. These operating
28 MM For Model 02. characteristic are shown as figure number 1
B. 22 MM For Model 01 And and 2.
60 MM For Model 02. : After installation of the dampener the fine
thread chock valve (diagram number 3)
should be adjusted to reduce pulsation in the
line and needle vibration. Dampener can
|
|
|
|
|
|
|
|
|